Skip to main content
Lotline StripingGet a Striping Bid

Warehouse Floor and Line Striping in Dallas

Forklifts, pallet jacks and people on foot share the same concrete. Clear floor lines tell each of them where to go and where to stop.

Warehouse line striping paints aisle lines, pedestrian walkways, dock zones and storage boundaries on concrete floors. One floor-coating contractor publishes $2 to $4 per linear foot for interior lines, depending on the coating. Use the form and an independent local pro will walk the floor and quote it.

Get a Striping Bid Cities covered

Request a striping bid

Sent to one independent striping contractor. No cost and no obligation. How referrals work

Who this is for

Distribution centers, manufacturing plants, cold storage buildings, auto shops and retail back rooms all use floor marking. Requests usually come with a new lease, a racking change, a safety audit or a near miss between a forklift and a person on foot.

Signs your floor lines need work

Paint, epoxy or tape

An OSHA directive on marking aisles and passageways says painted lines remain the most feasible method of marking, where practical. The same directive accepts other methods, such as marked pillars, flags or cones, as long as training teaches workers what the markings mean.

Coatings vary a lot. One contractor's published figures show basic traffic paint lasting 6 to 12 months indoors, industrial epoxy 12 to 36 months and a two-coat premium system 24 to 72 months. Epoxy and two-coat systems need 12 to 16 hours per coat at about 75 degrees, so the area is out of use longer.

Tape costs less up front, according to a floor-marking contractor's paint versus tape guide, but it doesn't hold up as long under heavy traffic. Paint can come out cheaper over time.

Planning the layout

Good floor marking starts on paper. Mark where racks end, where forklifts travel and where people walk, then keep those apart wherever you can. Common items on a plan:

Keep the color code simple and write it down. A code that only one supervisor understands won't help a new hire on night shift.

How a floor striping job goes

  1. Walk the floor. The pro maps aisles, racking, docks, doors and walkways with you.
  2. Agree on colors and widths. Your safety lead decides what each color means. The plan should match your training.
  3. Prep the concrete. Old tape and loose paint come off, and the floor is cleaned so the coating bonds.
  4. Lay out and paint. Lines are snapped and painted, with stencils for arrows, symbols or zone labels.
  5. Cure, then reopen. Each section stays closed until the coating has cured.

Most crews work in zones or on off shifts so the building keeps shipping.

Reported prices

Interior line pricing comes from one floor-coating contractor's published rates (a Minnesota company), so treat it as a reference point, not a Dallas quote.

ItemReported range
Basic traffic paint, interior lines$2 to $3 per linear foot
Premium two-coat line system$3 to $4 per linear foot
Directional arrows (outdoor guide figure)$10 to $30 each
Custom stencils (outdoor guide figure)$20 to $200 each

The arrow and stencil figures come from Angi's parking lot striping guide. Your real price depends on footage, prep and how much of the building can be closed at once. See parking lot striping cost for outdoor pricing.

Questions for the contractor

Many warehouse sites also need the truck court outside restriped. See parking lot restriping and fire lane and curb painting.

Areas we cover for warehouse line striping

Irving Garland Mesquite Carrollton Richardson Plano Grand Prairie Arlington Farmers Branch Addison Lewisville Rowlett DeSoto Duncanville Cedar Hill Lancaster Coppell Grapevine Balch Springs University Park

Striping FAQ

Does OSHA set one color for warehouse aisle lines?

The OSHA directive we read on aisle marking does not name a required color or width. Many sites pick a color code and train to it. Ask the pro what other sites in your industry use.

How long will our floor be out of use?

It depends on the coating. One contractor lists about 30 minutes for basic traffic paint and 12 to 16 hours per coat for epoxy at 75 degrees. Cold floors take longer.

Can the striping go down while we keep shipping?

Usually, if the job is split into zones. Give the pro your shift times and dock schedule in the request.

Is floor tape ever the better choice?

Tape costs less up front and works for short-term layouts or light traffic. Where forklifts turn all day, paint or epoxy usually lasts longer.