
Striping and marking jobs we match
Most properties need more than one of the jobs below. One request can cover all of them, and the contractor can price them as a single visit.
Restriping a faded layout
Sun, rain and tires wear traffic paint down faster than most owners expect. Angi's striping guide says most lots need fresh lines every one to two years. A restripe traces the lines you already have, so it is the fastest and cheapest job on this list. If you want to change stall angles, add stalls or move a drive lane, that becomes a layout job and costs more. One rule catches owners off guard: under the ADA.gov restriping brief, a business that restripes must provide accessible spaces as the 2010 ADA Standards require. See parking lot restriping for how the work goes.
Accessible stalls and access aisles
In Texas, the Texas Department of Licensing and Regulation (TDLR) administers the 2012 Texas Accessibility Standards. Section 502 sets a car stall at 96 inches wide minimum and a van stall at 132 inches, or 96 inches when the aisle beside it is 96 inches wide. Access aisles must be at least 60 inches wide and marked so people don't park in them. Our ADA parking compliance page covers counts, signs and slope.
Fire lanes and red curbs
Dallas Fire-Rescue publishes a fire lane information sheet. It calls for 6-inch red traffic paint lines with "FIRE LANE NO PARKING" in 4-inch white letters every 25 feet, painted on both the top and the face of any curb. It also reserves red curbs and red striping for approved fire lanes only. Suburbs set their own rules, so the pro checks with the local fire marshal. More on fire lane and curb painting.
Warehouse and shop floor lines
Inside a building, lines mark forklift aisles, walkways, staging zones and dock areas. An OSHA directive on aisle marking calls painted lines the most feasible method where practical. The paint, prep and cure time differ from outdoor work. Read about warehouse line striping.
Sealcoating before the paint
If the asphalt is gray and cracked, new lines on top look tired within months. Many owners sealcoat first and stripe second. Sealcoat makers call for two coats, and one maintenance guide says to wait at least 24 hours after the final coat before striping. See parking lot sealcoating.
Arrows, stencils and extras
Directional arrows, crosswalks, numbered or reserved stalls, "NO PARKING" words and wheel stops round out most jobs. List them in your request so the quote covers them.
Properties that use striping work
- Retail centers: heavy turnover wears the drive lanes and the stalls closest to the doors first.
- Office buildings: reserved and visitor stalls often need new stencils when tenants change.
- Churches: big weekend crowds, so most owners want the work done midweek.
- HOAs and apartment communities: residents need notice to move cars, so the schedule matters as much as the price.
- Warehouses and distribution sites: outdoor truck courts and indoor aisles can go on the same request.
What striping costs: reported ranges
These are national ranges from Angi's 2026 striping guide, HomeAdvisor's striping guide, Angi's paving guide and SealMaster's pricing FAQ. They are not Dallas quotes. Your real price comes from an on-site look.
| Item | Reported range | Source |
|---|---|---|
| Standard 4-inch lines | $0.20 to $1 per linear foot | Angi, HomeAdvisor |
| Stalls, small lot (10 to 20 stalls) | $15 to $25 per stall | Angi |
| Stalls, large lot (51 or more) | $7 to $15 per stall | Angi |
| Accessible stall with symbol | $25 to $50 each | Angi |
| Curb painting | $0.75 to $1 per linear foot | HomeAdvisor |
| Directional arrows | $10 to $30 each | Angi |
| Mobilization | $250 to $350 per job | SealMaster |
| Sealcoating | $0.14 to $0.25 per square foot | Angi paving guide |
Most of the swing comes from lot size, because the trip and setup cost is spread over more stalls on a big lot. The full breakdown is on our parking lot striping cost page.
From request to fresh paint
- Use the form. Tell us the address, rough stall count and what needs paint.
- We match you. Your request goes to an independent striping contractor who works your part of Dallas-Fort Worth.
- On-site look. The pro measures, counts stalls and checks accessible stalls and fire lanes.
- Written quote. You get a price in writing, with the scope spelled out line by line.
- You decide. Hire the pro, ask questions or walk away. The request costs you nothing.
Before you send the request
A few details help the contractor price the job on the first visit:
- The property address and whether the lot is asphalt or concrete.
- A rough stall count, and how many accessible stalls you have now.
- Which jobs you want: restripe, new layout, fire lanes, curbs, stencils, sealcoat or indoor lines.
- Days and hours the lot is quiet, plus any gate or access notes.
- Any letter from a city inspector or fire marshal, if one prompted the work.
Photos of the worst areas help too. You can mention them in the form and share them when the pro calls.
Cities we cover around Dallas
Requests come in from Dallas and the cities around it. The service areas page lists every city. A few of the busiest: Irving, Garland, Plano, Richardson, Carrollton and Grand Prairie.
Why use a referral service
We don't own striping machines and we don't send crews. What we do is short: take your request and get it in front of a contractor who handles this kind of lot. That saves you a round of calls. The request is free to you, and we may be paid by the contractor for the referral. You still choose who to hire, so check insurance and ask for photos of past lots. If a quote looks off, you can say no and send a new request. We would rather you hire the right contractor than the first one. Our about page explains the model in more detail.
Striping FAQ
Do I have to add accessible stalls when I restripe my lot?
In most cases, yes. The ADA.gov restriping brief says a business or government that restripes must provide accessible spaces as the 2010 ADA Standards require. The count depends on total stalls in each lot, from 1 for up to 25 stalls to 9 for 401 to 500.
Can my lot stay open while it gets striped?
Usually. Crews often work one section at a time and cone off the wet rows. For busy sites, ask about early morning, evening or weekend work. Put your business hours in the request so the pro can plan around them.
Which paint lasts longest on a Dallas parking lot?
Angi reports that water-based paint lasts 6 to 18 months, solvent-based paint 12 to 24 months and thermoplastic 3 to 5 years. Thermoplastic costs more up front. The pro can tell you which fits your traffic and budget.
Who decides where fire lanes go?
The fire department, not the painter. In Dallas, the fire lane information sheet says red curbs and red striping are only for approved fire lanes. If you are unsure where yours are, ask the pro to check your approved site plan or the local fire marshal.
Does Lotline Striping do the striping?
No. We are a referral service. An independent local contractor does the work, gives you the quote and stands behind it. We pass your request along so you don't have to hunt for one.
What should I have ready before the contractor visits?
A site plan if you have one, a rough count of stalls, photos of problem spots and any notice from the city or fire marshal. Also note gate codes or hours when the lot is empty.
Is there a minimum charge for a small lot?
Often there is. SealMaster lists mobilization at $250 to $350 per job, and Angi notes minimum trip charges for small lots. That is why a 10-stall lot costs more per stall than a 200-stall lot.
Do you take requests outside the city of Dallas?
Yes. We take requests from the cities listed on our service areas page, from Irving and Grand Prairie to Plano, Garland and the southern suburbs.